- #Magic touch spacecontrol for free#
- #Magic touch spacecontrol install#
- #Magic touch spacecontrol serial#
Double click Touch USB icon to open touch control panel.Ĭlick the C alibration button, choose either 5 or 25 point calibration and click ‘GO!’ To calibrate, touch and hold the center of each circle for a full second before lifting your finger. After Windows is rebooted, two new icons are created on desktop. (For Win 98 & ME, plug in the controller after reboot.) 1.2.4. When “ must reboot Windows to complete the installation ” shows, click OK to reboot.
After Windows has found the new hardware, click OK to continue. Click START RUN to run the setup from the driver CD.įor Win XP & 2000: When the system prompts “ please plug in the Magic Touch USB to USB port ”, plug in the controller. (Vista may require your permission to allow setup to run.) Note: If setup window does not open, the CD - Rom’s autorun may be disabled. The setup window will display on the desktop.
#Magic touch spacecontrol install#
Install Magic Touch driver on Windows OS: 1.2.1. Touch the center of the cross and release.Ĭomplete the 4-point calibration. Use the stylus supplied to perform calibration for better accuracy. To calibrate, you can click and run the tabcal shortcut on the desktop to launch the calibration utility. In next window, click “Finish”, and you will now have a shortcut on your desktop labeled “tabcal.exe” 1.1.2.4. Note: it is important to key in the exactly same phrase with space after tabcal.exe, and make sure that the ‘N’ and the ‘V’ are capitalized, and that there is no space between ‘No’ and ‘Validate”. In the field “Type the location of the item”, key in the following phrase:%windir% system32 tabcal.exe NoValidate, then click next. Right click the desktop, select “New>Shortcut”. If you use ProE controller, plug in the controller before the computer is turned on.Ĭalibrate Vista tablet driver: 1.1.2.1. The screen should respond to your touch, but the position may not be accurate. Plug in the USB controller, Windows will find new hardware. If you have already installed it, you must uninstall it first. Vista: If you prefer to use Vista’s embedded tablet driver, DO NOT install Magic Touch driver from the CD. For Windows: (Must logon with administrator’s password for Vista /XP/2000) 1.1.1. Linux user: please see readme file in Linux folder for setup instructions.
Mac user: please see Sec.įor instructions. Mac driver CD is included only if you have ordered Mac version (USB-M or USB-WM). Windows 2000 and XP Multi Monitor setup and examples are under the folder MultiMonitor 2K-XP.
#Magic touch spacecontrol for free#
All Windows and Linux drivers are included on one CD, or they can be downloaded for free (except Mac version). USB-X D controller (Win Vista, XP, 2000, ME, 98, Mac 9.2.2-10.5.x, Linux.) If there is a previous Magic Touch driver or other touch screen ’s driver installed in your system, uninstall them first. Plug the touch screen cable into the controller box. For add-on models KTMT-1214, 1500, 154W, 1700W, 1900W, 2200W and 2400W, and all the built-in touch screen models, connect the extension cable between touch screen and controller with white dots aligned.
#Magic touch spacecontrol serial#
The ProE-X (or ProE) controller should be plugged into the serial port (com1 or 2) when the computer is powered off.
The USB-XD & USB-5 (or USB-X, USB) controller should be plugged into the USB port as instructed by the following driver installation steps. TheMagicTouch opens up a whole new world of full colour printing onto an almost endless variety of substrates and products, providing a previously unknown.
0 kommentar(er)
